Добро пожаловать,
Гость
|
Отключите пожалуйста ADblock, если включен...
ТЕМА: Autoconnect wifi
Autoconnect wifi 19 Июль 2018 17:44 #4498
|
Здравствуйте, помогите пожалуйста разобраться с автоматическим подключением wifi на thinstation 5.5.
На работе купили Gigabyte brix 3000 и мучаем его уже неделю. Никак не хочет работать, на данный момент собрал образ c allmodules, чтобы не заморачиваться, всё это залито на флешку. Настройки для подключения wifi должны подтягиваются из файла thinstation.conf.user, который лежит на этой же флешке. Вот build.conf ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] ################################################ ### --- Thinstation Build Config --- ### ################################################ # # # This is Thinstation s basic setup file. In this file you decide which # hardware, programs and features to be included in the Thinstation # boot image generated by running "./build". # # You can customize/limit the possibilities in the thinstation.conf # files later. # # Anything after a "#" is a comment. You activate "things" by removing # the "#" and remove "things" by putting a "#" in front of them. # # First we define which modules to include. Modules are hardware # drivers. NEVER include more than necessary - the more modules, the # longer boot time. ######################################################## ### --- Machine Modules to include in boot image --- ### ######################################################## # A machine profile is a set of modules for a specific set of hardware # components like a thinclient with adapters. It does not include any # filesystem modules, those need to be selected individualy. Making a # a machine profile is a two step process. First you will need to make # an allmodules build like "./build --allmodules" with the extensions-x # package included. Once the client machine is booted with that image # you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh # will compile some lists and attempt to post them to the pxe server assigned # to the client. If the pxe server is this workstation and you are hosting # files directly out of this build env, you can then run # "./mkmachine SOME-MODEL" and the files will be put into the machine folder # under that model name. Now all you have to do is add a line to this file # like "machine SOME-MODEL" and you will no longer have to make # allmodules builds. If this is not the pxe server, you will have to # move stuff around on your own, but the most important files are # modules.list and firmware.list. ################################################ ### --- Modules to include in boot image --- ### ################################################ # Any modules may be added as "module" or "module_pkg". # If defined as a "module", the driver is included in the boot image. # If defined as a "module_pkg", the driver is added from outside the # image, such as from a tftp server. See note below for more details. # # Normally you should use "module". Only use "module_pkg" if you want # to dynamically load modules. # Note: If you create a module_pkg network driver, and decide to load it # from a tftp server, it won t work. This is because the image # won t have a network driver to get the module_pkg in the first # place. #!Hardware #!!Machine module list #machine m704 # Gigabyte m704 Rover PC #machine WYSE9150se # WYSE 9150se Thin Client #machine NT-A3500 # Foxconn AMD E-350 Barebone #machine NT-535 # Foxconn Intel D525 Barebone #machine Dell-FX170 # Dell FX170 D525 Atom Machine machine VMWare # A good set of modules for a VmWare Virtual Machine machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine machine qemu # A good set of modules for qemu #machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old #machine classic_generic # Big list of modules that you can choose by unremarking them #machine IGEL-M300C # Igel CX700 Via #machine HP-t5135 # HP CX700 Via #machine HP-t620 #HP t620 Thin Client #machine foxconn-nT-330i # Foxconn nT 330i Barebone #machine foxconn-nT-435 # Foxconn nT 435 Barebone #machine foxconn-nT-535 # Foxconn nT 535 Barebone #machine foxconn-nT-A3800 # Foxconn nT A3800 Barebone #machine foxconn-nT-i2847 # Foxconn nT i2847 Barebone #machine foxconn-nT-iBT18 # Foxconn nT iBT18 Barebone #machine foxconn-nT-n270 # Foxconn nT n270 Barebone #machine Acer-Revo-M1-601 # Acer Revo M1-601 #machine Lenovo-T420s # Lenovo T420s Laptop #machine Lenovo-T430s # Lenovo T430s Laptop #!!Wireless Stuff package wpa_supplicant package wireless #package wifi-connect #!!!Misc Modules #!!Filesystem Support # Every mounted device needs a filesystem, so choose which ones you need. module usb-storage module autofs4 # Automount and autofs support module isofs # ISO9960 file system support for CDRoms module udf # CDRom UDF file system support module vfat # Fat and VFat file system support #module ntfs # NTFS file system support #module ext2 # Ext2 file system support #module ext3 # Ext3 file system support module ext4 # Ext4 file system support #module nfs # NFS file system support #module cifs # CIFS support (use either this or smbfs - not both) ################################################# ### --- Packages to include in boot image --- ### ################################################# # A package is a program or utility. # Any packages may be added as "package" or "pkg". # If defined as a "package", the program is included in the boot image. # If defined as a "pkg", the program is added from outside the image. # Normally, you should use "package". Only use "pkg" if you want to # dynamically load programs. # --- Packages to include in boot image # --- Packages below may be "package" or "pkg" #!!Miscellaneous package overlayfs # This is needed in order for squashfs compression mode to work. #package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd package automount #package netfiles # Adds only this package instead of the whole ts-classic. netfiles lets you get thinstation.conf.xxx files # from the TFTP-server package udisks package autonet #package networkmanager #package udisks-glue package ntp # Utility to obtain date & time from network #package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control #package sound-nasd # sound on your thin client from another computer or # your remote session. package alsa #package pulseaudio #Enable Pulse Audio Server. Required for Skype Virtualisation Pack in Horizon View Client 4.5+ package gnome-media #package gnome-network-properties package gnome-core package volumeicon #package kismet package gst-plugins-base package gst-plugins-good #package crystalhd #package libva #package iptables # IP Tables support package cpufreq #package cpuspeed #package wine # Windows Application Execution Platform #!!X related # --- XOrg 7.7 #package xorg7-v4l package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes package xorg7-vmware package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares package xorg7-nouveau #New opensource nvidia driver #package xorg7_nvidia #Proprietary nvidia driver #package xorg7_nvidia_64 # Additional 64bit module package xorg7-openchrome #Via Video Chipsets driver package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600 package xorg7-qxl #QEMU video driver #package xorg7-sis #!!Locale or localization files for keyboard and fonts. (Language/Country) #package locale-cs_CZ # Czech #package locale-da_DK # Danish #package locale-de_DE # German #package locale-en_GB # English-Great Britain package locale-en_US # English-US #package locale-es_ES # Spanish #package locale-fi_FI # Finnish #package locale-fr_BE # French Belgium #package locale-fr_CA # French Canadian #package locale-fr_CH # French Switzerland #package locale-fr_FR # French #package locale-hr_HR # Croation #package locale-hu_HU # Hungarian #package locale-it_IT # Italian #package locale-ja_JP # Japanese #package locale-nb_NO # Norwegian (bokmål) #package locale-pl_PL # Polish #package locale-pt_PT # Portuguese #package locale-pt_BR # Portuguese-Brazil package locale-ru_RU # Russian #package locale-sv_SE # Swedish #package locale-tr_TR # Turkish #package locale-uk_UA # Ukrainian #!Applications #!!Connection Package types. Choose *at least* one! #package freerdp # X RDP Client - fork of rdesktop package rdesktop # X RDP client for Windows Terminal Services (ver 1.7) #package vncviewer # VNC client (vncviewer) #package xorg7vnc # Remote Control Client Workstation #package ica # Citrix ICA client support #package tarantella # Tarantella client support #package xnest # XDM in a window client #package urxvt # Light Xterm Client (vt102) #package xterm # Xterm Client (vt220) #package ssh # Secure Shell client #package tn5250 # 5250 terminal emulator #package dillo # Dillo light web browser #package thinlinc # Cendio ThinLinc client support #package nx # No Machine NX client #package 2x # 2X client #package java # Java runtime #package firefox_lowmem # Firefox 3 for low resource machines package firefox # Firefox current Web Browser #package chrome # Google Chrome Web Browser #package chromium # Chromium Web Browser #package kiosk # Rkiosk Plugin for Firefox #package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines #package flash # Flash Current #package filezilla # FileZilla FTP Client for X #package git # GIT Version Control System #package gparted # Gnome Partition Manager package open-vm-tools package vboxguest #package medit # Notepad #package mplayer # DVD and video player #package vmview # VMware Open-View Client, no PCoIP #package vmviewpcoip # VMware Open-View Client, PCOIP #package vmhorizonclient # VMware Horizon Client 4.x #package xbmc # XBMC Media Center for X #package evince # X PDF Viewer #!!Window Managers. Choose no more than 1 window manager. # Not needed if you don t want to manage windows. #package openbox # A spartin clean/fast window manager. #package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for # more help. #package icewm # "ICEWM" window manager. Makes TS a light workstation. #package icewm-theme-xp #package icewm-themes # Extra IceWM themes #package icewm-theme-bernstein #package icewm-theme-bluecrux #package icewm-theme-liquid package xfwm4 #package xfwm4-extra package xfce4-power-manager package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4 package thunar # File Manager for xfwm4 -- Pulls in xfwm4 #!!Window Manager Utils #package idle-shutdown # Package that lets you specify automatic shutdown settings and logic. #package wbar # Adds icons to desktop #package idesk #!!Other services #package www # Web access to client. From a browser: "http://<IP number>" # The standard page is for general user settings, administrative access # is on port 6800. #package lp_server # Remote printing daemon (JetDirect compatible) #package lpr # LPR Print Server, for use with samba-server package #package lprng # LPRng Print Server, supports network based printing package cups #package sshd # Dropbear secure shell server #package tftpd # Built in tftpd server. Useful for making a tftpserver # for thinstation on a WAN over a slow link. #package samba-server # Samba server FS Support, allows you to share # local floppy/cdrom/hd/printer to other Windows # PCs. Needs supermount for removeable media. package samba-client # Samba smbclient, gives a shell like environment to access an samba server #package hdupdate # Package for updating TS images on a hardisk over a network connection #package scp # Add ability to download files over internet using scp. This package # adds some networking based options for downloading configuration files or # in using hdupdate package. #package openvpn # OpenVPN Client Support #!!PCSCD Card Readers #package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB) #package ccidreader # Generic USB card reader #!!Miscellaneous package gtk-2.0 # Full gtk-2.0 plus clearlooks theme package icons-cursor # Anti Aliased Mouse Cursor Theme package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons. package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes. #package icons-tango # tango Hi-Color icons theme #package icons-neu # neu Hi-Color icons theme #package fonts-misc #package fonts-jis-misc # Japanese Industrial #package fonts-util #package fonts-cyrillic #package fonts-Speedo-Bitstream package fonts-TTF-BH # This one works nicely most of the time and is small. package fonts-TTF-vera #package fonts-TTF-MS # Fonts for rendering documents developed on the MS Platform. # Might want to talk to a lawyer before using these. package fonts-TTF-liberation #package fonts-75dpi-Adobe #package fonts-75dpi-Adobe-Utopia #package fonts-75dpi-BH #package fonts-75dpi-BH-Typewriter #package fonts-75dpi-Bitstream #package fonts-100dpi-Adobe #package fonts-100dpi-Adobe-Utopia #package fonts-100dpi-BH #package fonts-100dpi-BH-Typewriter #package fonts-100dpi-Bitstream #package fonts-Type1-Adobe-Utopia #package fonts-Type1-BH #package fonts-Type1-Bitstream #package fonts-Type1-IBM #package fonts-Type1-xfree86 #package lshw # list hardware #package e3 # Basic vi like Editor #package rox # Basic File Manager #package debug # metapackage to include other debugging packages and stop during bootup to check things. #package extensions # Adds various shell commands, will increase image size. #package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!! #package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI. #package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server #package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder #package ca-bundle # Adds many standard SSL and PKI root certificats. Include this package if you have issues with certificate trusts. package set-resolution # Allows the user to change the resolution via the start-menu. #package local-install # Makes it possible to install Thinstation locally on the machine but still have a central image # management via automatic updates and version control when the client boots. For more information # see /ts/build/Documentation/README.local-install and /ts/build/thinstation.conf.sample # (generated during first build) #package custom-idle # Shuts down the client based after X minutes if some applications/sessions are not running. #package custom-background # Allows you to dynamically set a diffrent background in the conf-files when the client boots. # For example have a background-image in the build with an error-message and then in # thinstation.conf.network set the "regular" background. This way the user will receive an # error message on the screen if the client was unable to get the config files from the # Web- or TFTP-server when it booted. #package hdd-spindown # Sets hard drives into sleep mode (spin down) when they are idle. See thinstation.conf.sample for info. #package openssl # Probably needed by the Citrix Receiver 13.2 version. # Parameters ######################################## ### --- Miscellaneous Parameters --- ### ######################################## #!!Basic #param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce # memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch) # Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch. #param tsuser tsuser # Name of the user that thinstation will run as. Needs userauto package. #param tsuserpasswd pleasechangeme # Do Change! Console/telnet password for non-root param rootpasswd pleasechangeme # Do Change! Console/telnet password for root # If this is enabled, Telnetd will be enabled. param xorgvncpasswd pleasechangeme # VNC Access Password param storagepasswd pleasechangeme # Password for storage server param dialuppasswd pleasechangeme # Password for dialin account param sambapasswd pleasechangeme # Password for samba shares when using user mode security #param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer #param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe) #param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled) #param uvesafb disable # Disable uvesafb (legacy option like modesetfb) #param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards) param bootlogo true # Enable or Disable the use of the Boot splash. param boottheme default # Backgound picture during boot #param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent) param splash silent param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high #param fbnocrtc true # This is usually a good thing. param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people #param fbvtotal 16 # Override Video Bios Reported Memory in MB #param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency #param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency #param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency #param fbnoedid true # Don t do video edid #param bootresolution 1024x600-32 # Resolution used during Thinstation boot. #param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it. #param bootresolution 1152x864-32 param bootresolution 1280x768-32 #param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh #param bootresolution 1280x1024-32 # for modes that your card supports. #param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified. #param bootresolution 1680x1050-32 #param bootresolution 1920x1080-32 #param bootresolution 1400x1050-32 #param bootresolution 1920x1200-32 param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found # during boot. param basename thinstation # Used for all config/tftp/scp file names param basepath ts5.5 # Used to determine path to tftp/scp files param baseurl www.doncuppjr.net # Used to determine url to wget files #param baseurl http://192.168.78.17 # Used to determine url to wget/http files - your local web server #param baseurl 'http://${SERVER_IP}' # Used to determine url to wget/http files - if you wan't to use a web server on the same server as the TFTP server #param keyfile ./id_rsa # Path for private key file used for ssh/scp #param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp #param localpkgs false # to determine is PKG files are to be loaded locally #param fulllocales true # Use full locale support for packages #param icaencryption false # Use ica encryption support, add 290k to image param haltonerror false # Will halt on error, default is true param hardlinkfs true param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone param initrdcmd "squashfs" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9 param bootverbosity 3 # Increased vebosity when booting TS # 0 no verbose messages # 1 boot # 2 network # 4 init # 8 kernel # 16 modules # 32 packages # 64 email bootlog file to SMTP server & user set in # thinstation.conf file. This will only work # if networking is working. # # Combinations can be used (e.g. 24 does Kernel and Module Messages) #!!Advanced # Leave this alone unless you can t download (wget required on your Linux box): param downloads /downloads param bootimages "iso syslinux pxe refind" #param bootserver "192.168.1.1" # Used for the pxe image config files to specify where to download # the syslinux image from. Result is generated in # /ts/build/boot-images/pxe/boot/lpxelinux/pxelinux.cfg/default # so that you can specify APPEND initrd=http://<bootserver>/boot/initrd param syslinuxtheme "default" #param httpproxy http://192.168.1.2:8080 #param bootfssize 50% # Modify the size of the tmpfs filesystem package alltimezone param allres true # Includes a lot of resolution splash images for live-cd s param allfirmware true # Includes a lot of firmwares for live-cd s param blacklist snd-pcsp.ko Файл thinstation.conf.buildtime ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] AUDIO_LEVEL=90 MIC_LEVEL=0 SESSION_0_TYPE=xfwm4 SESSION_0_AUTOSTART=on XFWM4_COMPOSITING=true XFWM4_BRIGHTNESS="-33" XFWM4_RED=0 XFWM4_GREEN=0 XFWM4_BLUE=0 XFWM4_START_POSITION="BOTTOM" DESKTOP_ICON_SIZE=48 DESKTOP_FONT_SIZE=8 DESKTOP_SHOWTRASH=false DEKSTOP_SHOWHOME=false DESKTOP_SHOWREMOVEABLE=true DESKTOP_SHOWFILESYSTEM=false GTK_THEME=Xfce XFWM4_THEME=Default PANEL_PAGER=false PANEL_USER=false PANEL_REV_CLOCKSYSTRAY=true ICONS_THEME="gnome" ICONS_CUT_SIZES="256x256 scalable" XTERM_CMD="xfce4-terminal" NET_FILE_ENABLED=Off NET_USE=BOTH NET_USE_DHCP=on NET_HOSTNAME=ts_* NET_TELNETD_ENABLED=ON TIME_ZONE=America/Los_Angeles NET_TIME_SERVER=us.pool.ntp.org NET_REMOTE_ACCESS_FROM="0.0.0.0" TFTP_BLOCKSIZE=1024 BIND_MOUNT0="storage:/mnt/storage" STORAGE_CONFIG1=/mnt/storage STORAGE_CONFIG2=/mnt/usbdevice/sda1 USB_STORAGE_SYNC=on LOCALE=en_US MOUNT_0="LABEL=boot /boot auto x-mount.mkdir,defaults 0 0" MOUNT_1="LABEL=home /root auto x-mount.mkdir,defaults 0 0" MOUNT_2="LABEL=swap swap swap defaults 0 0" SET_RESOLUTION_MULTIMONITOR_EXPAND='mirror' SET_RESOLUTION_MULTIMONITOR_AUTOSCALE='scale' И thinstation.conf.user ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] LOCALE=en_US TIME_ZONE=Europe/Moscow WIRELES_MODE="managed" WIRELESS_DRIVER="madwifi" WIRELESS_ESSID="MySSID" WIRELESS_WPAKEY="MyPASS" Руками подключить wifi возможность есть. Ещё пытались впихнуть скрипт, который будет вбивать пароль на SSID, но он не хочет отрабатывать. Буду очень признателен за помощь. |
Последнее редактирование: 19 Июль 2018 18:35 от MEL.
Администратор запретил публиковать записи гостям.
|
Autoconnect wifi 20 Июль 2018 06:16 #4499
|
WIRELESS_ESSID="MySSID"
WIRELESS_WPAKEY="MyPASS" Это для примера или у Вас такие сид и пароль? Варианты: Попробуйте раскомментировать package wifi-connect и (или) package networkmanager, закомментив package autonet. Попробуйте для начала забить параметры в thinstation.conf.buildtime, может у Вас thinstation.conf.user на цепляется. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 20 Июль 2018 06:40 от admin.
Администратор запретил публиковать записи гостям.
|
Autoconnect wifi 20 Июль 2018 09:52 #4500
|
SSID & PASS для примера.
С пакетами тоже пересобирали. thinstation.conf.user точно подхватывается, мы через него параметры для подключения к серверу передаём и локальное время. На данный момент смогли реализовать скрипт и сделали для него отдельный пакет. Теперь в thinstation.conf.user указываем наши 2 переменные и подключение происходит автоматически. ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] #! /bin/sh # WiFi . $TS_GLOBAL case "$1" in init) if ! pkg_initialized $PACKAGE; then nmcli dev wifi connect $NMWIFISSID password $NMWIFIPASS fi ;; help) echo "Usage: $0 init" ;; *) exit 1 ;; esac exit 0 Но всё же очень хочется разобраться, почему не работает стандартными средствами. |
Администратор запретил публиковать записи гостям.
|
Autoconnect wifi 20 Июль 2018 09:57 #4501
|
К сожалению (или к счастью ) у меня нет wi-fi подключений, так что на практике помочь не смогу.
Теоретически команду nmcli dev wifi connect $NMWIFISSID password $NMWIFIPASS Если разберётесь - делитесь опытом, кому то пригодится. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 20 Июль 2018 09:58 от admin.
Администратор запретил публиковать записи гостям.
|
Autoconnect wifi 04 Июнь 2020 15:05 #5290
|
Autonet работает, только вот подключение происходит спустя 10 - 20 секунд, по крайней мере в TS 6.2.
Для использования NetworkManager распакуйте архив nmwifi.tgz в каталоге /build/packages/, а в build.conf добавьте package nmwifi и будет вам счастье. Параметры для подключения берутся из стандартных переменных WIRELESS_ESSID и WIRELESS_WPAKEY. Понимаю, что возможно не актуально, но пишу скорее для себя чтобы самому себе потом облегчить задачу. sourceforge.net/projects/it-advisor/files/nmwifi-2.tgz/download |
Последнее редактирование: 26 Фев 2022 07:46 от admin.
Администратор запретил публиковать записи гостям.
Спасибо сказали: admin
|